Brace Clamp

Chisel Router

Neck Support

Oud Grabber fixture

This lightweight clamp provides precise clamping pressure for gluing braces on the soundboard without the weight of c-clamps and at the cost of one store bought clamp.

Used to remove material for inlays. Different size chisels can be mounted and adjustment is done with a light hammer tap. a block with a curved bottom is used for inlaying the back.

This support allows you to clamp the oud to the support and workbench in two positions.

This solves the problem of how to hold the oud, especially to allow two hand control of your tools. It's adjustable for any size oud with vertical and horizontal slots for the body stops and a rotating neck support. The extra length of the lower beam provides a clamping surface to secure it to the workbench.